How to Clean Epoxy Garage Floors?

If you are considering using an epoxy garage floors coating to protect your garage, you may have some questions about how to clean an epoxy floor. In this article, we will share tips for dealing with spills, removing dirt, and applying a clear top coat.

Remove dirt and grit

One of the easiest ways to clean epoxy garage floors is by vacuuming. Using a suction cleaner with a soft brush attachment will eliminate surface dirt. If you have a large area to cover, you may want to purchase a hard foam mop. This type of mop will also remove built-up dirt.

If you have a heavy build-up of dirt, you can try an ammonia and hot water mixture. You can apply this on the entire floor, or just a small area. Be sure to let it soak in for at least ten minutes.

Another way to clean your epoxy garage floor is to use a soft deck brush to sweep out the grit. Grit is not only damaging, but it will etch into your epoxy surface.

Avoid soap-based cleaners

If you want to keep your epoxy garage floor looking good and clean, you should avoid soap-based cleaners. These kinds of cleaners can damage your epoxy coating, leaving it with a hazy film. They can also make it slippery, making it dangerous for people with mobility problems.

To remove stains from your garage floor, you can use an all-purpose cleaner. An all-purpose cleaner can help you get rid of tough stains, such as tire marks. You can also use a hard foam mop to clean the surface. However, stringy mops can leave streaks on the surface.

For lighter stains, you can use a pressure washer or a floor buffer. However, a power wash can cause accidental damage to an epoxy floor. Some stains, such as grease, are tough to remove. Instead of using a soap-based cleaner, you can try a vinegar or ammonia solution. This solution can remove greasy stains and de-gloss an epoxy floor.

Apply a clear top coat

If your garage floor has been painted with an epoxy coating, it is a good idea to apply a clear top coat to make the floor more durable and easier to clean. You will also find that the final look of the surface is improved.

When you are preparing to apply a clear topcoat to your garage floor, there are a few steps you should take. First, you should use a brush or broom to sweep your floor and get rid of all dirt and dust. Next, you should wipe off the old finish. This will help to remove any dust particles that may be left behind after the first coat.

Once you have cleaned your epoxy floor, you can begin to apply the new coat. After applying the first layer of epoxy, you should let it dry for about two hours.

Avoid metal frame squeegees

When cleaning your epoxy garage floor, it is important to avoid using metal frame squeegees. Using these tools can damage the coating. Instead, use a squeegee that has a soft or rounded end.

You can also use a shop vacuum with a soft brush attachment to sweep loose debris. Using a soft cloth is also helpful. It will help remove any lint that may have fallen into the coating.

If there is a large amount of dirt on the surface of your epoxy garage floor, you may need to squeeze it. This will ensure that the material is spread evenly and that there are no marks on the surface.

Another option is to spray the entire floor with a concrete cleaner. Allow the cleaner to sit for 10 minutes, and then scrub the area with a nylon or stiff-bristle brush.

Deal with liquid spills

When dealing with liquid spills on the epoxy garage floor, it is best to take care of them right away. Spills that are left to dry can cause the floor to become slippery and may cause stain spots. Aside from this, they can also damage the coating.

For small spills, use a clean cloth or paper towel. However, if the spill is very large, you’ll need to have a more comprehensive approach. Using a sponge or soft deck brush can be effective. If you’re unable to get rid of the stain, consider using an all-purpose cleaner.

You can also remove rust stains by using a soft deck brush or scrubbing pad. This can help you avoid causing further damage to the floor. Alternatively, you can use a lactic acid-based cleaning solution. These solutions can break up salt film and grease on the surface. They also prevent chemical reactions with water. Rinse the floor with cold water after using the solution.

Solid Custom Floor Coatings – Denver
https://www.google.com/maps?cid=4563019754315154656
10292 S Progress Way #B, Parker, CO 80134, United States
+1 303-209-6536
https://solidgaragefloorcoatings.com/